How to empty toilet water?

Knowing how to empty the toilet water is essential to allow you to change certain parts (such as the tank or the bowl ) as well as when you want to clean and descale them thoroughly. Many cleaning products work better when the latter is empty . We explain without further delay what steps to follow.

Empty the toilet tank

The first thing to do when wondering how to empty toilet water is to empty the tank . This will prevent water from filling your bowl when you empty and clean it. To do this, it is necessary to prevent new water from entering . The procedure is very simple to do:

Turn off the power to your toilet. This is done through a small tap that is usually located at the top right or left of your tank. Be careful not to force it too much if the installation is fragile .
Turn it clockwise.
Flush the toilet to remove any water from the tank. Once the tank is completely empty , there will be no more water to fill your bowl, making it easy to empty and clean .

If your toilet continues to fill , it is because you have not closed the water supply valve properly. If necessary, you can check the remaining water level by lifting the flush lid. Be careful, this is a fragile part that can break if it falls. It is advisable to place it in a stable place while you carry out the manipulation.

Use the toilet brush

Once your tank is empty , it is necessary to flush the water out of the bowl. This is done directly using a toilet brush :

Start by putting on household gloves so as not to get your hands dirty with water splashes. You can also protect the floor with mops.
Raise the toilet seat and then take your toilet brush .
Place it at the bottom of the bowl and make a back and forth motion. Start with slow movements, which will allow you to limit the risk of splashing, then intensify the movement until all the water is removed .

It is this piston movement that will allow the water to be flushed through the siphon and therefore empty the toilet bowl. The process should take you 2 to 3 minutes. If there is still a little stagnant water, you can remove it using a water vacuum cleaner .

There you have it, now you know how to empty toilet water quickly and easily!

Additional Toilet Maintenance Tips

In addition to flushing the toilet, it's important to know a few additional maintenance tips . For example, using white vinegar and baking soda can be an eco-friendly and effective way to descale and deodorize your toilet bowl. Additionally, regularly checking the condition of the seal between the toilet bowl and the tank can help prevent leaks and water damage .

Blockage Prevention

To avoid blockages, it is advisable not to flush anything down the toilet except toilet paper . Products such as wipes, cotton swabs or feminine hygiene products should be thrown in the trash . Careful and responsible use helps keep your pipes in good condition.